Dual Cams
by josep (community developer)popularity rank: 17
description: User configurable Dual Cams with PIP control.
preview of 'Dual Cams' app
This content requires Adobe Flash Player 8 or greater.
Click the widget to enable audio if the widget uses it. Note that modern browser security may prevent the widget from loading content from other web sites, however the widget should be able to load properly on the chumby devices. These previews are possible through the use of Ruffle ‐ note that Ruffle is still a work in progress, and not all Flash features are implemented, so some widgets may not perform optimally.
Blue Octy LLC is providing these community-developed apps as a courtesy and makes no representations regarding the apps or any information related to them. Any questions, complaints or claims regarding the apps should be directed to the appropriate author
Comments
swissmawi
– May 01 2015
How to use it with DLink cams? DL-932L...
tietzchumby
– July 15 2012
update: and this time with other bracket types... Wansview NCB-541W (bought as: Wireless IP Pan/Tilt/ Night Vision Internet Surveillance Camera Built-in Microphone With Phone remote monitoring support(Black)) Left: http://[username]:[password]@[DDNS name or ext IP]:[port}/decoder_control.cgi?command=6&onestep=5 Right: http://[username]:[password]@[DDNS name or ext IP]:[port}/decoder_control.cgi?command=4&onestep=5 Up: http://[username]:[password]@[DDNS name or ext IP]:[port}/decoder_control.cgi?command=2&onestep=5 Down: http://[username]:[password]@[DDNS name or ext IP]:[port}/decoder_control.cgi?command=0&onestep=5
tietzchumby
– July 15 2012
Wansview NCB-541W (bought as: Wireless IP Pan/Tilt/ Night Vision Internet Surveillance Camera Built-in Microphone With Phone remote monitoring support(Black)) Left: http:// : @ : /decoder_control.cgi?command=6&onestep=5 Right: http:// : @ : /decoder_control.cgi?command=4&onestep=5 Up: http:// : @ : /decoder_control.cgi?command=2&onestep=5 Down: http:// : @ : /decoder_control.cgi?command=0&onestep=5
TVaudio
– December 20 2011
Terrific app! Works great with Foscam FI-8918W. Oddly, the pan/tilt controls work on my Infocast 3.5", but not the 8". In this example, I've setup the Foscam with a port of 8001. Of course, users would replace the the urls with values appropriate for their setup (typically port 80, etc). url: http://admin:[email protected]:8001/snapshot.cgi left: http://admin:[email protected]:8001/decoder_control.cgi?command=4&onestep=5 right: http://admin:[email protected]:8001/decoder_control.cgi?command=6&onestep=5 up: http://admin:[email protected]:8001/decoder_control.cgi?command=2&onestep=5 down: http://admin:[email protected]:8001/decoder_control.cgi?command=0&onestep=5
rogerfujii
– August 19 2011
Nice, app. But found a bug. For some reason, this app appends a ?0.somefloatingpointnumber to the end of the URL, so it causes any URL that requires parameter passing on the URL to fail. This is probably also JOTAS' problem. One can get around this problem by appending a '#' at the end of the url (which does a proper GET on the camera), but this app still won't display - probably because it can't figure the mime type. Works great for cameras that you can do an http GET an image file.
Networked-Systems
– August 03 2011
Hi Lancer21, I have just logged into my sony dash account and can confirm that the syntax is correct. In my case it is: http://Admin:[email protected]:8085/snapshot.cgi Maybe you need to careful with upper and lower case letters in the username/ password. I hope this helps you. - James
happyshow
– July 26 2011
I have both the Linksys WVC80N and the Grandstream GXV3615W. Below are the correct URL's for each camera. Replace [username], [password], [ipaddress] and [port] with the appropriate values for your network: Linksys WVC80N: http://[username]:[password]@[ipaddress]:[port]/img/snapshot.cgi Grandstream GXV3615W: Primary Stream http://[username]:[password]@[ipaddress]:[port]/snapshot/view0.jpg Secondary Stream http://[username]:[password]@[ipaddress]:[port]/snapshot/view4.jpg
Lancer21
– June 22 2011
I have a Foscam and SONY Dash. I this app and configured. http://username:password@ipaddress:port/snapshot.cgi It doesn't work. Please help! Thanks
Networked-Systems
– May 01 2011
Foscam camera URL format is as follows: http://username:password@ipaddress:port/snapshot.cgi I have tested this on the Chumby 3.5, Insignia 8" and also the Sony Dash. Works Perfectly!! :-) Have Fun! James
JOTAS
– April 18 2011
Hello i have a panasonic cam BL-C210A and it works on the chumby dashboard but on the actual device tells me CAM1 (error) load nevercom. Im using http://ipcam/SnapShotJPEG?Resolution=640x480&Quality=Motion Please help!
skiernan
– January 17 2011
Has anybody got this to work on the Insignia product? I have 2 cameras i want to view but i cannot get it to work? They are Astak Mole cameras with PTZ function. If you know how to set these up your help is appreciated.
josep
– January 06 2011
Hi Sillyfutner, To tell you the truth, I don't know. Can you try it on your insignia? I guess I can go to Best Buy and give it a shot. I know it works on my Chumby Classic.
josep
– January 06 2011
dpotter: You can just tap on the main cam and the PIP will toggle off so you don't actually have to configure the second one.
Sillyfutner
– January 05 2011
After reading the comment's, I cant help but to wonder if it is working on the Insignia 8"?
dpotter
– January 23 2010
Can you make a Solo one, without the PIP? I can't anyone else's single cam viewers to work on my Chumby.
dpotter
– January 22 2010
Love it, get to see a constant picture of my (faraway) hometown.
josep
– January 05 2010
Hi siewhuenho: yes, the widget works on the chumby. It seems that for some reason it does not work with the chumby emulator. Josep
siewhuenho
– January 03 2010
is this widget functioning ?
jfrinak
– July 31 2009
Josep: Recently I became aware that your "Dual Cam" widget for Chumby no longer seems to work in virtual mode online. I was using it to monitor two in-home security cameras, but all of a sudden my Chumby channel started skipping the Dual Cam widget as if it was not there. I was thinking it might be a problem with the Chumby website, but it has not cleared after over a week. So, for the time being, I have switched to a different WebCam widget, but would really prefer to use yours. Do you know why it stopped working all of a sudden? Did something change with Chumby that the widget was not compatible with? thanks. [email protected]
josep
– January 29 2009
Hi ftown. I think a good source of open cams can be found in the chumby spy widget documentation. The developer for that widget searches for cams on the internet and verifies that they work using code written in phython.
ftown
– January 26 2009
where can I get URL's of cameras?
josep
– January 20 2009
The widget allows you to view two http cam simultaneously. Here is more info: http://forum.chumby.com/viewtopic.php?id=3447
ncouncil
– January 20 2009
What is this? A little bit of an explanation would be helpful.
Log in to leave a comment.